V-belt Movendis P-C148
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C148 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C148 and any equivalents.
The Movendis P-C148 is a classical wrapped V-belt in profile C. Its 3759 mm length and 22 mm top width identify the size you need when matching an existing belt or specifying a replacement. This page gives the key dimensions for maintenance, engineering and purchasing teams.
Profile C is the cross-section family, and the P-C148 uses a 22 mm top width with a 14 mm height and a 40° angle. The length is 3759 mm. Those four values are the practical identifiers: the profile must match the pulley groove, and the length must match the drive center distance. A C-section belt will not sit correctly in a pulley cut for a different profile.
When you read the marking on the back of an old belt, compare it with these dimensions. If the marking is worn or missing, measure the top width and the outside length, then check them against the 22 mm and 3759 mm figures here. The wrapped construction is typical of classical V-belts used on industrial drives, and the profile and length are what determine fit.
For a quote, send the part number P-C148 and the quantity you need. If you are replacing a belt on a drive that runs more than one belt, note the full set so the replacement can be matched. Our team can confirm the profile and length from the data you provide and help you identify the right belt.
Dimensions
- Section
- C
- Length
- 3759mm
Frequently asked questions
- What do the profile and length tell me about the P-C148?
- The profile C indicates the cross-section, with a 22 mm top width, 14 mm height and 40° angle. The length is 3759 mm. Together these determine whether the belt fits the pulley groove and the drive center distance.
- How do I confirm this is the belt I need?
- Check the marking on the back of the existing belt, or measure the top width and the outside length. Compare those measurements with 22 mm and 3759 mm. If they match, the P-C148 is the correct size.
- What should I send to request a quote?
- Send the part number P-C148 and the quantity. If the drive uses multiple belts, include the full set quantity so the replacement can be handled as a set.