V-belt Movendis P-C150
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C150 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C150 and any equivalents.
Matching a classical V-belt to the one being replaced starts with the marking on the old belt and the drive it runs on. The Movendis P-C150 is a C-profile classical wrapped V-belt, 3810 mm long, with a 22 mm top width, 14 mm height and 40° angle. Confirm those dimensions against the belt you are removing before you order.
A C-profile belt is identified by its top width and height, so measure the old belt across the top and through the section rather than relying on the part number alone. The P-C150 is listed at 22 mm top width and 14 mm height, with a 40° angle. Its length is given as 3810 mm, measured as the belt's listed length; compare it with the length marked on the belt being replaced.
If the old belt is worn, stretched or its marking is unreadable, work from the drive instead: the pulley groove section, the number of ribs or grooves, and the center distance. Send the part number P-C150, the belt marking, or the profile and length you measured, and we will confirm the belt or suggest an equivalent.
For drives running more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys for wear, alignment and contamination while the belts are off, and check that the replacement belt sits correctly in the groove before tensioning.
Dimensions
- Section
- C
- Length
- 3810mm
Frequently asked questions
- How do I confirm the P-C150 matches my old belt?
- Check the marking on the old belt and measure its top width, height and length. The P-C150 is a C-profile classical V-belt with a 22 mm top width, 14 mm height, 40° angle and 3810 mm listed length. If those match, it is the same size.
- What should I send to request a quote?
- Send the part number P-C150, or the profile and length you measured from the belt being replaced. Photos of the belt marking and the drive pulleys help us confirm the right belt or suggest an equivalent.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replace the full set together so the belts carry the load evenly. Mixing a new belt with worn belts can overload the new one. Inspect pulley grooves and alignment at the same time.