V-belt Movendis P-C133
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C133 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C133 and any equivalents.
Before you fit a new Movendis P-C133 classical V-belt, inspect the drive and sheaves. Worn grooves, misalignment or damaged sheaves can shorten belt life and cause vibration or slipping. A quick check now helps you get the full service life from the replacement belt.
The P-C133 is a classical V-belt with a C profile. It measures 3378 mm in length, 22 mm in top width and 14 mm in height, with a 40° angle. These dimensions suit drives designed for C-section classical V-belts. Confirm the belt marking on the old belt matches this profile and length before ordering.
Check sheave grooves for wear, cracks or embedded debris. Use a straightedge or laser alignment tool to verify the sheaves are parallel and the belt runs true in the grooves. Inspect the bearings and shaft for play. If the drive has multiple belts, replace all belts as a set to keep tension even and avoid overloading one belt.
To request a quote, send the part number P-C133 and the quantity you need by WhatsApp or email. Our team can confirm the belt or suggest an equivalent. If you are unsure of the profile or length, include a photo of the marking on the back of the old belt.
Dimensions
- Section
- C
- Length
- 3378mm
Frequently asked questions
- What should I check on the drive before installing the P-C133?
- Inspect the sheave grooves for wear, cracks or debris. Verify the sheaves are aligned and the shafts have no play. Correct any issues before fitting the new belt.
- Can I replace just one belt on a multi-belt drive?
- No. On a multi-belt drive, replace all belts as a set so tension is shared evenly and no single belt takes extra load.
- How do I request a quote for the Movendis P-C133?
- Send the part number P-C133 and the quantity you need by WhatsApp or email. Our team will reply promptly to confirm the belt or suggest an equivalent.