V-belt Movendis P-C131
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C131 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C131 and any equivalents.
The Movendis P-C131 is a classical wrapped V-belt in the C profile. It measures 3327 mm in length, with a 22 mm top width, 14 mm height and a 40° angle. This belt is used on heavy-duty industrial drives where a wrapped classical V-belt is specified.
To confirm fit, check the drive for a C-profile sheave and measure the belt length along its pitch line. The P-C131 runs 3327 mm, so the old belt's marking or a direct measurement should match that figure. Also verify the belt cross-section: 22 mm across the top and 14 mm high, with a 40° angle. These dimensions must align with the sheave groove before installation.
When replacing, inspect the sheaves for wear and alignment, and check the tension of the new belt after run-in. If the drive uses multiple belts, replace them as a set to keep load sharing even. For a quote, send the part number P-C131, the quantity, and any details from the old belt's back marking. Our team can confirm the belt or suggest an equivalent based on the dimensions you provide.
Dimensions
- Section
- C
- Length
- 3327mm
Frequently asked questions
- How do I confirm the P-C131 fits my drive?
- Match the profile and length: C profile, 3327 mm length, 22 mm top width, 14 mm height, 40° angle. Check the sheave groove and the old belt's marking. If you are unsure, send us the drive details and we can help verify.
- Can I replace just one belt on a multi-belt drive?
- For even load sharing, replace all belts in the set at the same time. Mixing new and worn belts can cause uneven tension and premature failure.
- What information do you need for a quote?
- Send the part number P-C131, the quantity required, and any marking from the old belt. If you have the drive specifications, include those as well so we can confirm the correct belt or suggest an equivalent.