V-belt Movendis P-C130
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C130 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C130 and any equivalents.
The Movendis P-C130 is a classical V-belt in the C profile, with a length of 3302 mm. When you need to replace a belt, the most reliable starting point is the marking on the back of the old belt. That marking identifies the part number, and we carry the Movendis P-C130 to match it.
Before you order, read the old belt carefully. Look for the part number, profile, and length printed on the back. The P-C130 marking tells you this is a C profile belt with a 3302 mm length. If the marking is worn or unreadable, measure the top width and height: this belt has a top width of 22 mm and a height of 14 mm, with a 40-degree angle. These dimensions help confirm that the P-C130 is the correct replacement.
The P-C130 is a classical wrapped V-belt, not a narrow wedge belt or a cogged belt. It is used in industrial drives where a standard C profile belt is specified. Because belt markings can fade, always compare the old marking with the new belt before installation. If you are unsure, send us a photo of the old belt marking and the drive setup, and we will help you confirm the right part.
To request a quote, send the part number P-C130 by WhatsApp or email. If you have the old belt in hand, include the full marking and any visible dimensions. Our team replies promptly and can help confirm the right belt or suggest an equivalent when needed.
Dimensions
- Section
- C
- Length
- 3302mm
Frequently asked questions
- How do I confirm the Movendis P-C130 is the right belt for my drive?
- Check the marking on the back of your old belt. If it shows P-C130, this is the matching part. If the marking is unreadable, measure the top width and height: the P-C130 has a top width of 22 mm, a height of 14 mm, and a 40-degree angle.
- What should I send to get a quote for the P-C130?
- Send the part number P-C130 by WhatsApp or email. If you can, include a photo of the old belt marking and the drive setup. Our team will confirm the belt and reply promptly.
- Is the P-C130 a cogged or narrow profile belt?
- No. The P-C130 is a classical wrapped V-belt in the C profile. It has a length of 3302 mm, a top width of 22 mm, and a height of 14 mm.