V-belt Movendis P-C135
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C135 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C135 and any equivalents.
The Movendis P-C135 is a classical wrapped V-belt in the C profile. It measures 3430 mm in length, 22 mm across the top, 14 mm in height and has a 40° angle. When you need to match an existing drive, start by reading the marking on the back of the old belt.
The marking on the back of the belt gives you the profile and the length in one line. Compare that marking to the P-C135: profile C, length 3430 mm. If the numbers match, you have the same size. If the old belt is worn or the marking is gone, measure the top width and height with a caliper and check the angle against the pulley groove.
Because this is a wrapped classical V-belt, it is used on standard industrial drives where a C profile fits. The 40° angle is the standard V-belt angle for this profile. Confirm that the pulley groove is clean and free of wear before you install a replacement, since a worn groove can shorten belt life even when the size is correct.
MR Industrial Accessories LLC supplies this belt to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. To request a quote, send the part number P-C135 by WhatsApp or email. If you are unsure of the profile or length, send the marking from the old belt and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3430mm
Frequently asked questions
- How do I confirm that the P-C135 is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows the C profile and a 3430 mm length, the P-C135 is the matching size. If the marking is not readable, measure the top width (22 mm) and height (14 mm) and check the pulley groove angle (40°).
- What information should I send with my quote request?
- Send the part number P-C135, or send the full marking from the old belt. If the marking is missing, include the profile, the length in mm, and the top width and height you measured.
- Can I replace just one belt on a multi-belt drive?
- On a drive with several belts, replace the full set at the same time so the load is shared evenly. The P-C135 is a classical wrapped V-belt in the C profile with a 3430 mm length, 22 mm top width, 14 mm height and 40° angle.