V-belt Movendis P-C121
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C121 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C121 and any equivalents.
The Movendis P-C121 is a classical wrapped V-belt in the C profile, with a 3073 mm length, 22 mm top width, 14 mm height and 40° angle. Before fitting a new belt, inspect the drive and sheaves so the replacement runs correctly. MR Industrial Accessories supplies this belt to maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
A new classical V-belt will not correct worn sheaves or misalignment. Check the sheave grooves for wear, scoring or a polished bottom, confirm the sheaves are aligned, and make sure the drive is free of debris or oil before the P-C121 goes on. If the old belt shows uneven wear or cracking, the drive condition is worth reviewing first.
The P-C121 is identified by its C profile and 3073 mm length, with a 22 mm top width, 14 mm height and 40° angle. When you request a quote, send the part number and the belt marking from the back of the old belt so we can confirm the correct item. If you need help reading a worn or faded marking, send a photo with the request.
Dimensions
- Section
- C
- Length
- 3073mm
Frequently asked questions
- What should I check on the drive before installing the P-C121?
- Inspect the sheave grooves for wear or scoring, verify sheave alignment, and clean the drive of oil, debris or buildup. A worn or misaligned drive can shorten belt life even with a correct replacement.
- How do I confirm the P-C121 is the right belt?
- Match the C profile and 3073 mm length, and compare the top width of 22 mm, height of 14 mm and 40° angle. The most reliable reference is the marking on the back of the belt you are replacing.
- What information should I send with my quote request?
- Send the part number P-C121 and the marking from the old belt. If the marking is unreadable, include the profile and length, plus a photo of the belt and the drive if possible.