V-belt Movendis P-C119
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C119 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C119 and any equivalents.
This is a Movendis P-C119 classical V-belt in the C profile, 3023 mm long. Classical wrapped V-belts like this one are used on industrial drives that run at moderate speeds and need a belt that grips the pulley groove reliably. Confirm fit by matching the profile, length, and cross-section to the drive before ordering.
The P-C119 has a top width of 22 mm, a height of 14 mm, and a 40° angle. These dimensions place it in the C cross-section, so it seats correctly only in pulleys cut for a C profile. Check the old belt's marking and measure its outside length; the 3023 mm length on this belt must match the drive's required length.
Classical V-belts are common on fans, pumps, compressors, and other general industrial equipment where a wrapped belt handles the load. Inspect the sheaves for wear, alignment, and debris before installing a replacement, and check that the belt sits at the correct height in the groove.
Send the part number P-C119 by WhatsApp or email to request a quote. If you are unsure whether this C-profile belt fits your drive, include the old belt's marking and the pulley groove dimensions so the team can confirm it.
Dimensions
- Section
- C
- Length
- 3023mm
Frequently asked questions
- How do I confirm that the P-C119 fits my drive?
- Match the C profile, the 3023 mm length, and the 22 mm top width by 14 mm height cross-section to the belt currently on the drive. Also check that the pulleys are cut for a C-section belt.
- What does the 40° angle mean for this belt?
- The 40° angle is the included angle of the belt's cross-section. It is designed to match the groove angle of the pulley so the belt wedges in and transmits power without slipping.
- What information should I send with my quote request?
- Send the part number P-C119. If you want the team to confirm the fit, include the marking on your old belt and the pulley groove dimensions.