V-belt Movendis P-C117
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C117 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C117 and any equivalents.
The Movendis P-C117 is a classical wrapped V-belt in the C profile with a length of 2970 mm. Its 22 mm top width, 14 mm height and 40° angle match the dimensional requirements of a standard C-section drive. This page gives maintenance, engineering and purchasing teams the exact figures needed to confirm the belt against an existing drive.
The C profile is the key selection point: the belt is 22 mm across the top and 14 mm high, with a 40° angle. Those dimensions determine how the belt seats in the pulley groove and how it transmits load. The 2970 mm length is the datum for matching the drive center distance and take-up. Confirm all four values against the old belt or the drive documentation before ordering.
For a direct replacement, read the marking on the back of the existing belt and compare it with the P-C117 code. If the profile and length agree, the belt is the correct size for the drive. When a drive runs more than one belt, replace the full set at the same time so the belts share the load evenly and wear at the same rate.
Send the part number P-C117 by WhatsApp or email to request a quote. If you are unsure whether the C profile and 2970 mm length are right, include the old belt marking and the drive details with your message. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2970mm
Frequently asked questions
- What do the profile and length of the P-C117 tell me?
- The C profile gives a 22 mm top width, 14 mm height and 40° angle, so the belt fits standard C-section pulleys. The 2970 mm length sets the drive center distance. Both must match the existing belt or drive specification.
- How do I confirm the P-C117 is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length with the P-C117. If the drive uses multiple belts, replace the complete set so all belts carry the load together.
- What should I send to request a quote for the P-C117?
- Send the part number P-C117 by WhatsApp or email. If you want confirmation before ordering, include the old belt marking and the drive details so the team can verify the profile and length.