V-belt Movendis P-C122
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C122 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C122 and any equivalents.
The Movendis P-C122 is a classical wrapped V-belt in a C profile, 3100 mm long. It measures 22 mm across the top and 14 mm high, with a 40-degree angle. This page covers what to check on the drive before fitting it.
Before you install a new belt, inspect the sheaves. Look for worn grooves, rust, or buildup that can wear a belt quickly. Check that the sheaves are aligned and that the grooves match the belt's C profile, 22 mm top width, 14 mm height, and 40-degree angle.
Turn the drive by hand and check the bearings and shafts. A belt that runs hot or tracks poorly often points to a sheave or alignment problem, not the belt itself. Correct any issues before fitting the P-C122 so the new belt seats properly in the grooves.
The P-C122 is a classical wrapped V-belt, 3100 mm long. To request a quote, send the part number P-C122 by WhatsApp or email. If you are unsure of the number, send the marking on the back of the old belt and we will help confirm the right belt.
Dimensions
- Section
- C
- Length
- 3100mm
Frequently asked questions
- What are the dimensions of the Movendis P-C122?
- It is a C profile classical V-belt, 3100 mm long, 22 mm top width, 14 mm height, with a 40-degree angle.
- How do I request a quote for the P-C122?
- Send the part number P-C122 by WhatsApp or email. Our team replies promptly and can help confirm the right belt.
- What should I check before fitting this belt?
- Inspect the sheaves for wear, rust, or buildup, and check alignment. Confirm the grooves match the C profile and the belt's 22 mm top width, 14 mm height, and 40-degree angle.