V-belt Movendis P-A54
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A54 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A54 and any equivalents.
The Movendis P-A54 is a classical V-belt in the A profile, with a 1372 mm length, 13 mm top width, 8 mm height and 40 degree angle. The profile and length are the two dimensions that decide fit, so confirm both against your drive before ordering.
The A profile sets the cross-section: 13 mm across the top and 8 mm high, running in a 40 degree groove. The 1372 mm length is the datum that positions the belt around the pulleys. A belt with the same profile but a different length will not tension correctly, so match the length first and the profile second.
This is a classical wrapped V-belt from the Movendis Classical Wrapped V-Belts series. Wrapped construction suits standard industrial drives where the belt runs in matched grooves. If you are replacing an existing belt, read the marking on the back and compare it with the P-A54 code.
To request a quote, send the part number P-A54, the quantity, and any application details by WhatsApp or email. If you are unsure the A profile is correct, send the old belt marking and the pulley groove dimensions and our team will confirm the right belt.
Dimensions
- Section
- A
- Length
- 1372mm
Frequently asked questions
- What do the profile and length tell me about the P-A54?
- The A profile gives a 13 mm top width, 8 mm height and 40 degree angle, so the belt fits an A-section groove. The 1372 mm length is the outside length used to match the drive. Both must match your existing belt or pulley setup.
- How do I confirm the P-A54 is the right replacement?
- Read the marking on the back of the old belt and compare it with P-A54. Check that the profile is A and the length is 1372 mm. If the marking is worn, send the pulley groove dimensions and center distance for confirmation.
- What should I send to get a quote?
- Send the part number P-A54, the quantity you need, and any details about the drive. If you are unsure of the profile or length, include the old belt marking and pulley dimensions. Our team replies by WhatsApp or email.