V-belt Movendis P-A53
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A53 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A53 and any equivalents.
The Movendis P-A53 is a classical wrapped V-belt in the A profile, with a length of 1346 mm. It measures 13 mm across the top, 8 mm in height, and has a 40° angle. When you need to replace a belt, start by reading the marking on the back of the old belt.
The marking on the back of a worn belt gives you the profile and the part number to match. For the P-A53, the profile is A and the length is 1346 mm. Check that these figures match the belt you are removing before you request a quote.
This belt is part of the Movendis Classical Wrapped V-Belts series. Its top width is 13 mm, its height is 8 mm, and its angle is 40°. These dimensions define the belt's cross-section and fit in the pulley groove.
If the marking is worn away, measure the top width and the outside length of the old belt where possible. Send the part number P-A53, or the profile and length you find, by WhatsApp or email. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1346mm
Frequently asked questions
- What does the marking on the back of the belt tell me?
- The marking usually shows the profile and the part number. On this belt, the profile is A and the part number is P-A53. The length is 1346 mm, the top width is 13 mm, the height is 8 mm, and the angle is 40°.
- How do I request a quote for the Movendis P-A53?
- Send the part number P-A53 by WhatsApp or email. If you are replacing an existing belt, include the marking from the back of the old belt, or the profile and length you measured.
- What should I check if the old belt marking is unreadable?
- Measure the top width and the outside length of the old belt where possible. For the P-A53, the profile is A, the length is 1346 mm, the top width is 13 mm, the height is 8 mm, and the angle is 40°.