V-belt Movendis P-A54.25
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A54.25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A54.25 and any equivalents.
The Movendis P-A54.25 is a classical wrapped V-belt with an A profile and a 1375 mm length. Its 13 mm top width and 8 mm height fit standard A-section pulleys, and the 40° angle matches the groove geometry of those drives. Use these four figures to confirm the belt before you order.
Profile and length are the two dimensions that decide whether a classical V-belt will run correctly. The A profile sets the cross-section: 13 mm across the top, 8 mm tall, with a 40° included angle. The 1375 mm length establishes the belt's path around the pulleys. If either figure differs from the belt you are replacing, the drive will not tension or seat properly.
This belt belongs to the Movendis Classical Wrapped V-Belts series. The wrapped construction is suited to general industrial drives where a standard classical section is specified. The part number P-A54.25 is the reference to use when requesting a quote, and the A profile and 1375 mm length are the key details to verify against the old belt or the drive documentation.
For a confident match, read the marking on the back of the existing belt and compare it with the profile and length above. If the marking is worn or unreadable, measure the top width and the outside length, or send a photo of the belt and the pulley arrangement. The team can confirm the P-A54.25 or suggest an equivalent based on the data you provide.
Dimensions
- Section
- A
- Length
- 1375mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The A profile means the belt has a 13 mm top width, 8 mm height and 40° angle, so it fits standard A-section pulleys. The 1375 mm length is the belt's length around the drive. Both must match the original belt for correct fit and tension.
- How do I confirm the P-A54.25 is the right belt for my drive?
- Check the marking on the back of the old belt for the profile and length, or measure the top width and outside length. Compare those figures with the 13 mm top width and 1375 mm length listed here. If they match, the P-A54.25 is the correct reference.
- What should I send to request a quote?
- Send the part number P-A54.25, the quantity you need, and any marking or measurement from the old belt. If you are unsure, include a photo of the belt and pulleys. The team will confirm the belt or suggest an equivalent.