V-belt Movendis P-A24.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A24.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A24.5 and any equivalents.
The Movendis P-A24.5 is a classical wrapped V-belt in the A profile, with a 622 mm length. The profile and length are the two dimensions that decide whether this belt fits your drive, so start there when comparing it to the belt you are replacing.
The A profile gives this belt a 13 mm top width and an 8 mm height, with a 40° angle. A classical wrapped construction suits general industrial drives where a standard-section V-belt is called for. The 622 mm length is the datum to match against your existing belt or your drive's required span.
When you read the marking on the back of an old belt, note the profile letter and the length together. A belt can share the A profile but differ in length, and a length match in another profile will not sit correctly in the pulley groove. Compare both figures before you order.
If the marking is worn or the belt is missing, measure the drive and send us the profile, the length and the part number you have. We carry the Movendis P-A24.5 and can confirm it against your application or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 622mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The A profile sets the cross-section: 13 mm top width, 8 mm height and a 40° angle. The 622 mm length sets the span around the drive. Both must match the belt being replaced.
- How do I confirm the Movendis P-A24.5 is the right belt?
- Check the marking on the back of the old belt for the profile and length, or measure the drive. Send the part number and those figures by WhatsApp or email and we will confirm the match or suggest an equivalent.
- Can I replace just one belt in a multi-belt drive?
- On a drive running several belts together, replacing the full set keeps the load shared evenly. Send the quantity of belts on the drive with your quote request.