V-belt Movendis P-A23.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A23.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A23.5 and any equivalents.
The Movendis P-A23.5 is a classical wrapped V-belt in the A profile, 600 mm long. If you are replacing a belt on a drive that takes an A-section classical belt, this is the number to match against the one coming off.
The simplest way to confirm the fit is to read the marking on the back of the old belt and compare it with this one. The A profile corresponds to a 13 mm top width and an 8 mm height, and the belt is built with a 40° angle. The 600 mm length is the figure to check against the old belt's stated length. If the old belt is worn or the marking is gone, measure the outside length and confirm the section before ordering.
A classical wrapped V-belt of this type is used on drives that call for an A-section belt. Because a worn belt can sit differently in the pulley groove, matching by profile and length is more reliable than matching by appearance alone. If you are unsure whether this is the correct replacement, send the old belt's marking and the drive details.
We carry the Movendis P-A23.5 and quote by part number. Send the part number, the quantity, and the marking from the belt being replaced by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 600mm
Frequently asked questions
- How do I confirm the P-A23.5 is the right replacement?
- Check the marking on the back of the belt you are replacing. It should show an A profile and a 600 mm length. The P-A23.5 has a 13 mm top width, 8 mm height and 40° angle. If the marking is unreadable, measure the old belt and send the dimensions.
- Can you help if I cannot read the old belt marking?
- Yes. Send a photo of the old belt and the drive, or the pulley dimensions and center distance. The team will compare that against the P-A23.5 and confirm whether it matches or suggest an equivalent.
- What do I need to send for a quote?
- Send the part number P-A23.5, the quantity you need, and the marking from the belt being replaced. A photo of the old belt helps if the marking is worn. We reply by WhatsApp or email.