V-belt Movendis P-A24
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A24 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A24 and any equivalents.
The Movendis P-A24 is a classical wrapped V-belt in the A profile, with a 610 mm length. It suits drives that call for a wrapped classical belt rather than a narrow wedge or cogged construction. We carry it for maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
The most reliable way to match this belt is to read the marking on the belt you are replacing. If the drive currently runs an A profile belt at 610 mm, the P-A24 is the direct size to order. Confirm the profile letter and the length together, since a belt of the same length in a different profile will not sit correctly in the pulley groove.
The P-A24 is built to an A profile: 13 mm top width, 8 mm height and a 40 degree angle. Use those dimensions to check the belt against the pulley groove before installation. A belt that sits too high or too low in the groove, or that has worn sidewalls, usually points to a pulley problem rather than a belt problem.
On multi-belt drives, replace all belts in the set at the same time. Belts of the same size from different production runs can differ slightly in length, and mixing them loads the shorter belt first. Send us the part number, the profile and the length by WhatsApp or email and we will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 610mm
Frequently asked questions
- How do I confirm the P-A24 is the right belt for my drive?
- Read the marking on the belt you are removing. If it shows an A profile and a 610 mm length, the P-A24 matches. You can also measure the top width, height and angle and compare them with the 13 mm, 8 mm and 40 degree values for this belt.
- Should I replace all the belts on the drive at once?
- Yes. On drives that use more than one belt, replace the full set together so the load is shared evenly. A new belt mixed with worn belts will carry more than its share and can fail early.
- What should I send to get a quote?
- Send the part number P-A24, or the profile and length from the old belt, by WhatsApp or email. If you are unsure of the size, send a photo of the belt marking and the pulley arrangement and we will help confirm it.