V-belt Movendis P-A19
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A19 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A19 and any equivalents.
The Movendis P-A19 is a classical wrapped V-belt with an A profile and a 480 mm length. It is used in light-duty industrial drives where a standard wrapped belt is specified for the application.
This belt has a 13 mm top width, an 8 mm height and a 40° angle. The wrapped construction suits drives that run at moderate speeds and need a belt that grips the pulley groove reliably. It is commonly found on small fans, pumps, compressors and similar equipment where an A-profile belt is called for.
To confirm fit, check the drive for the pulley groove profile and the required belt length. The P-A19 is an A-profile belt at 480 mm, so the pulley must be cut for an A-section belt and the drive must accept that length. If the old belt is worn or the marking is unreadable, measure the top width, height and outside length to match the profile and length before ordering.
When requesting a quote, send the part number P-A19 and the quantity you need. If you are replacing an existing belt, include the marking from the back of the belt or the dimensions you measured. Our team can confirm the profile and length against your drive so you receive the correct classical wrapped V-belt.
Dimensions
- Section
- A
- Length
- 480mm
Frequently asked questions
- What is the profile and length of the Movendis P-A19?
- It is an A-profile classical wrapped V-belt with a 480 mm length, 13 mm top width, 8 mm height and 40° angle.
- How do I confirm this belt fits my drive?
- Check that the pulley groove is for an A-profile belt and that the drive accepts a 480 mm belt. If the old belt marking is unreadable, measure the top width, height and outside length and compare them to the P-A19 dimensions.
- What should I send to request a quote?
- Send the part number P-A19 and the quantity. If you are replacing a belt, include the marking from the back of the belt or your measured dimensions so we can confirm the profile and length.