V-belt Movendis P-A20.75
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A20.75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A20.75 and any equivalents.
The Movendis P-A20.75 is a classical wrapped V-belt in the A profile. It measures 530 mm long, 13 mm across the top, 8 mm high, and has a 40-degree angle. When you read the marking on the back of an old belt, this is the part number and profile to match.
Start by finding the marking on the back of the belt you are replacing. Confirm the part number P-A20.75, the A profile, and the 530 mm length. Check the top width of 13 mm, the height of 8 mm, and the 40-degree angle against the belt in your hand. A worn belt can measure slightly under these figures, so use the printed marking as the primary reference.
If the marking is worn or unreadable, measure the belt and compare the profile and length. The A profile is a classical V-belt cross-section, and the 530 mm length is the datum to match. The 13 mm top width, 8 mm height, and 40-degree angle complete the dimensional set for this belt.
Send the part number P-A20.75, the profile A, and the length 530 mm when you request a quote. Photos of the old belt and the drive it runs on help confirm the right item. If the marking is gone, include the measurements you took so the team can check the match.
Dimensions
- Section
- A
- Length
- 530mm
Frequently asked questions
- How do I identify the right replacement belt if the marking is worn?
- Measure the top width, height, and outside length of the old belt. Compare them to the A profile, 13 mm top width, 8 mm height, 40-degree angle, and 530 mm length of the P-A20.75. The printed marking on the back is the most reliable reference when it is still legible.
- What information should I send with my quote request?
- Send the part number P-A20.75, the profile A, and the length 530 mm. If you have the old belt, include a photo of the back marking and the drive. This helps confirm the correct belt.
- Does the P-A20.75 have a specific angle?
- Yes. The belt is listed with a 40-degree angle, along with a 13 mm top width and 8 mm height. These dimensions define the A profile cross-section for this belt.