V-belt Movendis P-A18.5

MOVENDIS P-A18.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A18.5 and any equivalents.

The Movendis P-A18.5 is a classical wrapped V-belt in the A profile, 470 mm long, with a 13 mm top width, 8 mm height and 40-degree angle. Before you fit it, inspect the drive and sheaves so the new belt is not damaged by worn grooves or misalignment.

Start with the sheaves. Check the grooves for wear, cracks, burrs or embedded debris, and confirm the pulley faces are clean and smooth. A groove that has worn wider or unevenly will let a new classical V-belt sit too deep, which leads to slip and rapid edge wear. Look at shaft alignment and belt tension as well: if the old belt failed early, the drive may be the cause rather than the belt.

The P-A18.5 is identified by its A profile, 470 mm length, 13 mm top width, 8 mm height and 40-degree angle. Match those figures to the marking on the belt you are replacing. If the old belt is worn or unreadable, measure the outside length and the top width, and send the drive details so we can confirm the right belt or suggest an equivalent.

For a quote, send the part number P-A18.5 by WhatsApp or email along with the quantity you need. If you are replacing more than one belt on a multi-belt drive, include the number of belts so the set can be matched. We carry Movendis belts and will reply promptly.