V-belt Movendis P-A118
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A118 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A118 and any equivalents.
The Movendis P-A118 is a classical wrapped V-belt with an A profile and a 3000 mm length. When you are replacing a belt, the most reliable approach is to match the belt you are taking off: confirm the profile and the length before you order.
Start with the marking on the belt being replaced. A classical V-belt carries its profile and length on the back, so read those two values first and compare them with the P-A118: A profile, 3000 mm length, 13 mm top width, 8 mm height and a 40 degree angle. If the old belt is worn or the marking is gone, measure the outside length and check the cross-section against those dimensions.
Profile and length are the two values that decide fit. The A profile sets the cross-section that seats in the pulley groove, and the 3000 mm length sets the span around the drive. A belt with the same profile but a different length will not tension correctly, and a belt with the same length but a different profile will not sit properly in the groove.
Send the part number P-A118 by WhatsApp or email with the equipment or drive information, and we will confirm the belt or suggest an equivalent. If you have the old belt in hand, a photo of the back marking and the measured length helps us check the match before you order.
Dimensions
- Section
- A
- Length
- 3000mm
Frequently asked questions
- How do I confirm the P-A118 matches the belt I am replacing?
- Read the profile and length marked on the back of the old belt. The P-A118 is an A profile with a 3000 mm length, 13 mm top width, 8 mm height and a 40 degree angle. If the marking is unreadable, measure the old belt and compare it with those values.
- What should I send to request a quote for this belt?
- Send the part number P-A118, along with the equipment or drive it fits and the profile and length of the belt being replaced. A photo of the back marking of the old belt is helpful if it is still readable.
- What if the old belt marking does not match the P-A118 exactly?
- Send the profile and length you found on the old belt. We will check them against the P-A118 and can help confirm the right belt or suggest an equivalent.