V-belt Movendis P-A120
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A120 and any equivalents.
The Movendis P-A120 is a classical wrapped V-belt with an A profile and a 3048 mm length. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, and embedded debris. A worn groove lets the belt sit too deep, so it slips and overheats. Confirm the sheaves are aligned and the shafts turn freely by hand. Measure the old belt only after you note how it sits in the groove.
The P-A120 has a 13 mm top width, 8 mm height, and 40 deg angle. These dimensions match the A profile and the 3048 mm length. If the drive uses more than one belt, replace the full set so all belts share the load. Tension the new belt to the drive maker's specification, then recheck after the first run-in.
Send the part number P-A120 by WhatsApp or email for a quote. If you are unsure of the profile or length, share the marking on the back of the old belt and a photo of the drive. We carry Movendis belts and can help confirm the right belt for your application.
Dimensions
- Section
- A
- Length
- 3048mm
Frequently asked questions
- What are the dimensions of the Movendis P-A120?
- It is an A profile classical V-belt with a 3048 mm length, 13 mm top width, 8 mm height, and 40 deg angle.
- Why inspect the drive before fitting this belt?
- Worn or misaligned sheaves cause slipping and heat, which shortens belt life. Check grooves, alignment, and shaft rotation first.
- How do I request a quote for the P-A120?
- Send the part number P-A120 by WhatsApp or email. If you need help confirming the belt, include the marking from the old belt and a photo of the drive.