V-belt Movendis P-A116
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A116 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A116 and any equivalents.
The Movendis P-A116 is a classical wrapped V-belt with an A profile and a 2946 mm length. The profile and length are the two dimensions a buyer should confirm first, because they determine how the belt sits in the pulley groove and whether it will run at the correct tension.
This belt has a 13 mm top width, an 8 mm height, and a 40° angle. Those three dimensions describe the cross-section that must match the pulley groove. The A profile is a standard classical cross-section, so the P-A116 is selected by profile and length rather than by a machine-specific listing.
The 2946 mm length is the datum to check against the old belt or the drive drawing. If the existing belt is worn or the marking has rubbed off, measure the outside length and confirm the profile before ordering. Send the part number, the profile, and the measured length for a quote.
For maintenance and purchasing, the P-A116 is a straightforward replacement item. Confirm the drive uses an A profile, verify the length, and check the pulleys for wear or misalignment before fitting the new belt.
Dimensions
- Section
- A
- Length
- 2946mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The A profile gives the cross-section: 13 mm top width, 8 mm height, and a 40° angle. The 2946 mm length gives the belt's length. Both must match the drive before you order.
- How do I confirm the P-A116 is the right replacement?
- Read the marking on the back of the old belt, or measure its outside length and cross-section. Check that the drive uses an A profile and that the length is 2946 mm.
- What should I send to request a quote?
- Send the part number P-A116, the profile A, and the length 2946 mm. If you are matching an old belt, include the marking or your measurements so we can confirm the correct belt.