V-belt Movendis P-A115
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A115 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A115 and any equivalents.
The Movendis P-A115 is a classical wrapped V-belt with an A profile and a length of 2920 mm. Its 13 mm top width, 8 mm height and 40-degree angle suit standard classical drives. Before fitting, inspect the drive and sheaves.
Check sheave grooves for wear, rust or embedded debris. Worn grooves can let a new belt sit too deep, causing slip and heat. Verify that sheaves are aligned and that the belt sits correctly in the groove.
Confirm the drive is locked out and tensioned to the equipment manufacturer's specification. A belt that is too loose slips; too tight loads bearings. Rotate the drive by hand to check for rubbing or misalignment.
The P-A115 marking on the back identifies the belt. If you need this size, send the part number P-A115 by WhatsApp or email with the quantity. We carry Movendis classical wrapped V-belts and can confirm the A profile and 2920 mm length.
Dimensions
- Section
- A
- Length
- 2920mm
Frequently asked questions
- What are the dimensions of the Movendis P-A115?
- It is an A profile classical wrapped V-belt with a length of 2920 mm, a top width of 13 mm, a height of 8 mm and a 40-degree angle.
- How do I request a quote for the P-A115?
- Send the part number P-A115 and the quantity you need by WhatsApp or email. Our team replies promptly to confirm the belt.
- What should I check before installing this belt?
- Inspect sheave grooves for wear, verify alignment, and confirm the drive is locked out. Tension the belt to the equipment manufacturer's specification.