V-belt Movendis P-A101
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A101 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A101 and any equivalents.
The Movendis P-A101 is a classical wrapped V-belt with an A profile and a 2570 mm length. The profile sets the cross-section that must match your pulley groove; the length sets the belt's path around the drive. Both are stated in the part data so you can compare against the belt you are replacing.
The A profile is a classical V-belt cross-section, not a narrow wedge belt. This belt measures 13 mm across the top, 8 mm in height and has a 40-degree angle. Those dimensions describe how it seats in the pulley groove, so confirm the existing belt and pulley match before ordering.
The 2570 mm length is the datum to check against your drive layout. If the old belt is worn or the marking is hard to read, measure the length and note the profile. The P-A101 is a wrapped classical V-belt from Movendis, supplied by MR Industrial Accessories.
For a quote, send the part number P-A101, the profile A and the 2570 mm length. If you are unsure whether this is the correct belt for your drive, include the old belt's marking and the pulley dimensions. We carry Movendis belts and can help confirm the right one.
Dimensions
- Section
- A
- Length
- 2570mm
Frequently asked questions
- What do the profile and length tell me about the P-A101?
- The A profile gives the belt's cross-section: 13 mm top width, 8 mm height and a 40-degree angle. The 2570 mm length is the belt's length. Match both to your drive before ordering.
- How do I confirm this belt fits my drive?
- Check the old belt's marking for the profile and length, or measure the top width and outside length. The P-A101 is an A profile belt at 2570 mm. If those match your drive, it is the correct size.
- What should I send to request a quote?
- Send the part number P-A101, the profile A and the 2570 mm length. If you have the old belt, include its marking and any pulley dimensions so we can help confirm the match.