V-belt Movendis P-A100
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A100 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A100 and any equivalents.
The Movendis P-A100 is a classical wrapped V-belt in profile A, with a length of 2540 mm. For maintenance and purchasing teams, the profile and length are the two numbers that decide whether a belt will seat and run correctly in an existing drive.
Profile A gives this belt a 13 mm top width and an 8 mm height, with a 40° angle. That combination fits the standard A-section pulley groove, so the belt sits at the correct depth and makes full contact with the flanks. The 2540 mm length is the datum you match against the old belt or the drive specification before ordering.
Because the profile and length are fixed by the drive, the most reliable way to order is to read the marking on the back of the belt you are replacing. Send that marking, or the part number P-A100, by WhatsApp or email and the team will confirm it against your requirement. If the marking is worn or missing, measure the outside length and the top width and send those figures for a check.
This is a classical wrapped V-belt, not a narrow wedge belt or a cogged belt, so it should not be substituted with a different profile without reviewing the pulley grooves and the drive layout. Ordering the correct profile and length keeps the belt seated properly and avoids premature wear on the pulleys.
Dimensions
- Section
- A
- Length
- 2540mm
Frequently asked questions
- What do the profile and length tell me about the P-A100?
- Profile A means the belt has a 13 mm top width, 8 mm height and 40° angle, which matches an A-section pulley groove. The 2540 mm length is the dimension you compare with the old belt or the drive specification to confirm it will fit.
- How do I confirm the P-A100 is the right belt for my drive?
- Read the marking on the back of the belt you are replacing and send it with your request. If the marking is not readable, measure the outside length and the top width and include those figures so the team can check the profile and length against the P-A100.
- Can I replace a classical V-belt with a different profile?
- A classical wrapped V-belt such as the P-A100 is made for a specific pulley groove. Changing profile without checking the pulley grooves and drive layout can affect how the belt seats and runs, so confirm the profile and length before substituting.