V-belt Mitsuboshi SPZ 750
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 750 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 750 and any equivalents.
This Mitsuboshi SPZ 750 is a narrow wedge V-belt in the SPZ profile. It is used where a compact, high-capacity drive is needed, such as on industrial machinery, pumps, fans, and compressors. To confirm fit, check that your drive takes an SPZ profile belt and that the datum length matches 750 mm.
The SPZ profile is defined by a 9.7 mm top width, an 8 mm height, and a 40° angle. These dimensions let the belt sit correctly in an SPZ pulley groove. If your drive uses SPZ pulleys, this belt is the correct profile. The same size is also listed under Optibelt SPZ 750, so you can compare markings if you are replacing an existing belt.
To confirm fit, read the marking on the back of the old belt. It should show the profile and length, for example SPZ 750. Also inspect the pulley grooves for wear, cracks, or debris, and check that the belt sits at the correct height in the groove. If the old belt is stretched or damaged, replace it and any matched belts on the same drive as a set.
When you request a quote, send the part number SPZ 750 and the quantity you need. If you are unsure about the profile or length, send a photo of the belt marking and the pulley dimensions. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm that the Mitsuboshi SPZ 750 fits my drive?
- Check that your pulleys are for SPZ profile belts and that the required datum length is 750 mm. The belt has a 9.7 mm top width, 8 mm height, and 40° angle. Also compare the marking on your old belt.
- What should I send to request a quote for this belt?
- Send the part number SPZ 750 and the quantity you need by WhatsApp or email. If you are unsure about the profile or length, include a photo of the belt marking and the pulley dimensions so the team can help confirm the right belt.
- Can I replace just one belt on a multi-belt drive?
- On drives that use matched sets, replace all belts at the same time. Mixing a new belt with worn belts can cause uneven tension and premature failure. Inspect the pulleys for wear and alignment before installing new belts.