V-belt Mitsuboshi SPZ 612
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 612 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 612 and any equivalents.
This Mitsuboshi SPZ 612 is a narrow wedge V-belt with an SPZ profile. It measures 9.7 mm across the top, 8 mm in height and has a 40° angle. Use it where a compact, high-capacity drive calls for a narrow cross-section.
Narrow wedge belts like this SPZ 612 are common on industrial drives where space is tight and the pulley grooves are cut for a wedge profile. The 9.7 mm top width and 8 mm height identify the cross-section, while the 40° angle matches the groove angle the belt is designed to run in. Confirm fit by checking the old belt's profile marking and measuring its top width and height before ordering.
The same size is also listed under Optibelt SPZ 612. If your drive uses more than one belt, replace the full set at the same time so the load stays evenly divided. Send the part number, the profile from the back of the belt and the quantity you need by WhatsApp or email, and our team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm this SPZ 612 belt fits my drive?
- Check the marking on the back of the old belt for the SPZ profile and compare the top width and height. This belt is 9.7 mm across the top and 8 mm high with a 40° angle.
- Can I use this belt if my old belt is marked with another brand?
- The same size is also listed under Optibelt SPZ 612. Send us the marking from your old belt and the drive details, and we will help confirm the match.
- What information should I send for a quote?
- Send the part number SPZ 612, the profile from the back of the belt and the quantity required. If you are replacing a set, include the number of belts on the drive.