V-belt Mitsuboshi SPC 8500
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPC 8500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 8500 and any equivalents.
This is a Mitsuboshi narrow wedge V-belt in the SPC profile with an 8500 mm length. The profile and the length are what a buyer needs to confirm before ordering, so both are stated plainly on this page. The same size is also listed under Optibelt as SPC 8500.
The SPC profile places this belt in the narrow wedge family, the section used where a standard V-belt section would be too wide for the drive. Because the profile controls how the belt sits in the groove, matching SPC is the first check. The 8500 mm length is the second. If the marking on the old belt reads SPC and the length reads 8500 mm, this is the size to quote.
On a replacement job, read the marking on the back of the belt rather than measuring a worn belt, since a belt that has run for a long time no longer reflects its original length. Confirm the profile and the length, then send both with the part number. If you are replacing more than one belt on the same drive, order the full set so the belts run together as a matched group.
We carry Mitsuboshi belts and quote by part number. Send the part number, the profile and the length by WhatsApp or email and the team will confirm the belt or suggest an equivalent. If the marking is worn or unreadable, send a photo of the drive and the belt so the profile and length can be checked.
Dimensions
- Section
- SPC
Frequently asked questions
- What do the SPC profile and the 8500 mm length tell me?
- The SPC profile identifies the belt as a narrow wedge V-belt in that section, and 8500 mm is its length. Both values need to match the drive before you order.
- Can I measure the old belt instead of reading the marking?
- A belt that has been in service can no longer reflect its original length. Read the marking on the back of the belt where it is legible, and send the profile and length with the part number.
- Is this size listed under another brand?
- Yes. The same size is also listed under Optibelt as SPC 8500.