V-belt Mitsuboshi SPZ 1862
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1862 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1862 and any equivalents.
The Mitsuboshi SPZ 1862 is a narrow wedge V-belt in the SPZ profile. The belt measures 9.7 mm across the top, 8 mm in height and carries a 40 degree angle. It is the part to reach for when a drive calls for an SPZ section belt and the old belt's marking reads SPZ 1862.
Matching a replacement starts with the belt you are taking off. Read the marking on the back of the old belt and confirm the profile and the part number before you order. If the back reads SPZ 1862, this is the same designation, so the section, top width, height and angle line up with what the drive was built around.
Where the old belt is worn, glazed, cracked or stretched, the marking can be hard to read. In that case, measure across the top of the belt and check the height, then compare against the SPZ figures above. An SPZ belt is narrower than a classic V-belt section, so a belt that sits too high or too low in the pulley groove is a sign the wrong section is fitted.
The same size is also listed under Optibelt SPZ 1862, which is useful when you are working from a parts list that names a different brand. Send us the part number and the profile you need, and we will confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm this is the belt I need to replace?
- Read the marking on the back of the belt you are removing. If it reads SPZ 1862, this belt carries the same profile designation. You can also measure the top width and height and compare them with the 9.7 mm and 8 mm figures listed here.
- What does the SPZ profile tell me?
- SPZ is the profile of this narrow wedge V-belt. The belt has a 9.7 mm top width, an 8 mm height and a 40 degree angle. Those dimensions are what seat the belt correctly in the pulley groove.
- What should I send to get a quote?
- Send the part number SPZ 1862, the profile, and the equipment or drive it fits. If the old belt's marking is worn, send the top width and height you measured. We reply by WhatsApp or email and can confirm the belt or suggest an equivalent.