V-belt Mitsuboshi SPZ 1787
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1787 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1787 and any equivalents.
The Mitsuboshi SPZ 1787 is a narrow wedge V-belt with an SPZ profile and a 1787 mm length. This page helps you match it to the belt you are replacing, so you can confirm the right part before you request a quote.
Start by reading the marking on the back of the old belt. You are looking for the profile and the length: SPZ and 1787. If the belt is worn or the marking is unreadable, measure the top width and height. This belt has a 9.7 mm top width, an 8 mm height and a 40-degree angle. Those dimensions, together with the 1787 mm length, identify the size.
The same size is also listed under Optibelt SPZ 1787. If your drive uses more than one belt, replace the full set at the same time so the belts share the load evenly. Check the pulleys for wear or debris and confirm the tension is set to the drive manufacturer's specification.
To request a quote, send the part number SPZ 1787, the brand Mitsuboshi, and the quantity you need by WhatsApp or email. If you are unsure about the profile or length, include the old belt's marking and the drive details. Our team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt for SPZ and 1787. If it is unreadable, measure the top width (9.7 mm), height (8 mm) and angle (40 degrees) and compare them to this belt. The length is 1787 mm.
- Can I replace just one belt in a multi-belt drive?
- It is best to replace the full set at the same time. Belts that have run together wear evenly, and mixing old and new belts can cause uneven loading.
- What information should I send with my quote request?
- Send the part number SPZ 1787, the brand Mitsuboshi, and the quantity. If you are unsure, include the marking from the old belt and details about the drive.