V-belt Optibelt SPZ 1862
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1862 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1862 and any equivalents.
This Optibelt SPZ 1862 is a narrow wedge V-belt in the SK metric profile series. It is used in industrial drives where a compact cross-section and a 1862 mm length are required. Confirm fit by checking the profile and length on the old belt.
The SPZ profile has a top width of 9.7 mm, a height of 8 mm and a 40° angle. These dimensions let it sit correctly in the pulley groove. Narrow wedge belts like this one are common on drives where space is tight and a standard V-belt would be too wide. The 1862 mm length is the datum to match when replacing an existing belt.
To confirm fit, read the marking on the back of the belt or measure the old part. The profile must match SPZ and the length must be 1862 mm. If the old belt is worn or the marking is gone, note the drive and pulley dimensions and send them with your request. The same size is also listed under Mitsuboshi SPZ 1862.
If you need this belt, send the part number Optibelt SPZ 1862 by WhatsApp or email. We carry Optibelt belts and can help confirm the right profile and length or suggest an equivalent. For a quote, include the quantity and any drive details you have.
Dimensions
- Section
- SPZ
- Length
- 1862mm
Frequently asked questions
- How do I confirm that the Optibelt SPZ 1862 fits my drive?
- Check the profile and length on the old belt. The profile must be SPZ and the length must be 1862 mm. If the marking is unreadable, measure the top width and height and compare them to 9.7 mm and 8 mm.
- What does the SPZ profile mean for fit?
- SPZ is a narrow wedge profile with a 9.7 mm top width, 8 mm height and 40° angle. It must match the pulley groove profile to run correctly.
- What should I send to request a quote for this belt?
- Send the part number Optibelt SPZ 1862 by WhatsApp or email. Include the quantity you need and any drive details that can help us confirm the fit.