V-belt Mitsuboshi SPA 2000
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPA 2000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2000 and any equivalents.
The Mitsuboshi SPA 2000 is a narrow wedge V-belt in the SPA profile. It is used in industrial drives where a compact, high-capacity belt is required, such as pumps, fans, compressors and machine tools. Confirm fit by checking the existing belt marking and measuring the drive grooves.
This belt has a 12.7 mm top width, 10 mm height and a 40° angle. The SPA profile is a narrow wedge section, often chosen when space is limited and the drive needs to transmit more power than a classical V-belt of the same width. The same size is also listed under Optibelt SPA 2000.
To confirm the correct replacement, read the marking on the back of the old belt. It should show the profile and the length, such as SPA 2000. Also check the pulley grooves for wear and make sure the belt sits correctly. If the marking is unreadable, measure the top width and height and compare them with the values above.
When replacing belts on a multi-belt drive, install a full set of matched belts. Mixing new and used belts can cause uneven load and vibration. Send the part number and quantity by WhatsApp or email to request a quote.
Dimensions
- Section
- SPA
Frequently asked questions
- How do I confirm that the SPA 2000 is the right belt for my drive?
- Check the marking on the back of the existing belt. It should show SPA and 2000. You can also measure the top width (12.7 mm) and height (10 mm) and compare with the values for this belt.
- What does the SPA profile mean?
- SPA is a narrow wedge V-belt profile. It has a 12.7 mm top width, 10 mm height and 40° angle. This profile is used in industrial drives where a compact belt is needed.
- Can I use this belt with other brands?
- The same size is also listed under Optibelt SPA 2000. Always confirm the profile and length match your drive requirements.