V-belt Mitsuboshi SPA 1982
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPA 1982 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 1982 and any equivalents.
This Mitsuboshi belt is an SPA profile narrow wedge V-belt. It is identified by the code SPA 1982 and is used in industrial drives that take an SPA section belt. The same size is also listed under Optibelt SPA 1982.
Narrow wedge V-belts in the SPA section are common on compact drives where a standard V-belt would be too wide. The 12.7 mm top width, 10 mm height and 40° angle match the SPA groove, so confirm the pulley section before ordering. If the drive runs multiple belts, replace the full set so the load stays even across the grooves.
The most reliable way to confirm fit is to read the marking on the back of the old belt. If it shows SPA 1982, this belt matches that size. If the marking is worn or missing, measure the top width and height and check the pulley groove profile. Send the part number, the belt marking or a photo of the old belt, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check that the pulley groove is an SPA section and that the old belt is marked SPA 1982, or measure the top width and height. The SPA profile has a 12.7 mm top width, 10 mm height and 40° angle.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replace the full set. Mixing a new belt with worn belts can cause uneven tension and load across the grooves.
- What information should I send for a quote?
- Send the part number SPA 1982, or the marking from the back of the old belt. If the marking is not readable, send the top width, height and a photo of the belt and pulley.