V-belt Mitsuboshi SPA 2057
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPA 2057 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2057 and any equivalents.
The Mitsuboshi SPA 2057 is a narrow wedge V-belt in the SPA profile with a 12.7 mm top width, 10 mm height and 40° angle. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, burrs, rust or embedded debris. Worn grooves let a belt sit low and slip, while damaged flanges can cut the sidewalls. Confirm the sheaves are aligned and the shafts turn freely. Correct any misalignment or runout before the belt goes on.
The same size is also listed under Stark SPA 2057 and Optibelt SPA 2057. If you are matching an existing belt, read the marking on the back and send that part number with your quote request. We carry the Mitsuboshi SPA 2057 and can confirm it against your drive details.
For a quote, send the part number, the quantity and the equipment or drive it serves. If you are unsure of the profile, share the top width, height and any length marking from the old belt. We reply by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, burrs, rust or debris, and check alignment and runout. Correct any issue before fitting the Mitsuboshi SPA 2057 so the belt seats and tracks properly.
- How do I confirm the SPA 2057 is the right belt?
- Read the marking on the back of the old belt and compare the profile and dimensions. The SPA 2057 has a 12.7 mm top width, 10 mm height and 40° angle. Send those details with your quote request.
- What information do you need for a quote?
- Send the part number, quantity and the equipment or drive it serves. If you are unsure of the profile, include the top width, height and any length marking from the old belt. We reply by WhatsApp or email.