V-belt Mitsuboshi C 92
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 92 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 92 and any equivalents.
The Mitsuboshi C 92 is a classical V-belt with a C profile, a 22 mm top width and a 14 mm height. Its included angle is 40 degrees. Before you fit it, inspect the drive so the new belt is not damaged by worn components.
Check the sheaves for wear, grooving, cracks and burrs, and confirm they are clean and correctly aligned. Worn or misaligned sheaves can shorten belt life and cause noise or slip. Verify the groove matches the C profile and that the belt sits at the correct depth rather than riding on the bottom of the groove.
Confirm the belt marking on the back reads C 92 and that the profile and dimensions match the drive requirements. The same size is also listed under Stark C 92 and Optibelt C 92, so you can compare markings when checking a replacement. If the old belt is worn, glazed or stretched, replace it rather than reinstalling it.
For a quote, send the part number C 92, the quantity and the drive it serves. Our team replies to quote requests sent by WhatsApp or email and can help confirm the right belt for the application.
Dimensions
- Section
- C
Frequently asked questions
- What are the dimensions of the Mitsuboshi C 92?
- It is a classical V-belt with a C profile, a 22 mm top width, a 14 mm height and a 40 degree angle.
- What should I check before fitting this belt?
- Inspect the sheaves for wear, grooving, cracks, burrs and alignment, and confirm the groove suits the C profile. Clean the drive and make sure the belt sits correctly in the groove.
- How do I request a quote for the C 92?
- Send the part number C 92 and the quantity by WhatsApp or email. The team replies promptly and can help confirm the correct belt.