V-belt Optibelt C 92
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 92 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 92 and any equivalents.
When a drive goes down, the fastest way to identify the correct replacement is the marking printed on the back of the old belt. This page covers the Optibelt C 92 VB, a classical V-belt in the C profile with a 2438 mm length. Read your belt's marking against the specifications below before you request a quote.
The Optibelt C 92 VB is a classical V-belt with a C profile, a top width of 22 mm, a height of 14 mm and a 40-degree angle. Its length is 2438 mm. These figures describe the belt as supplied, so they are the values to compare against the marking on the belt you are replacing.
The same size is also listed under Mitsuboshi C 92 and Stark C 92, which can help when a drive carries a different brand and you need to match the profile and length rather than the name on the back.
Markings fade, wear away or become hard to read on a belt that has run for years. If the print is gone, measure the top width, height and outside length and note the drive and sheave details. Send the part number or those measurements through WhatsApp or email and our team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2438mm
Frequently asked questions
- How do I read the marking on my old V-belt?
- Look for the profile letter and the length number printed on the back of the belt. On this belt the marking reads C 92, which corresponds to a C profile and a 2438 mm length. If the print has worn off, measure the top width and height instead.
- What are the dimensions of the Optibelt C 92 VB?
- It is a classical V-belt in the C profile with a 2438 mm length, a 22 mm top width, a 14 mm height and a 40-degree angle.
- What should I send to get a quote?
- Send the part number from the back of the belt, or the profile and length if the marking is unreadable. Photos of the belt and the drive help our team confirm the match or suggest an equivalent.