V-belt Mitsuboshi C 91
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 91 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 91 and any equivalents.
The Mitsuboshi C 91 is a classical V-belt with a C profile, a 22 mm top width, a 14 mm height and a 40° angle. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check the sheave grooves for wear, cracks, burrs or embedded debris. Confirm that the sheaves are aligned and that the groove profile matches the 40° angle of this belt. Worn or misaligned sheaves can shorten belt life and cause vibration or slipping even when the belt itself is correct.
The same size is also listed under Stark C 91 and Gates C 91, so you can compare what is already on the drive. Read the marking on the back of the old belt and match the profile and length before ordering. If the drive runs more than one belt, replace the full set at the same time and re-tension after the first hours of operation.
To request a quote, send the part number C 91, the quantity and the drive details by WhatsApp or email. If you are unsure whether this C-profile belt fits your application, include the old belt marking and a photo of the drive, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
Frequently asked questions
- What are the dimensions of the Mitsuboshi C 91?
- It is a classical V-belt with a C profile, a 22 mm top width, a 14 mm height and a 40° angle.
- What should I check before installing this belt?
- Inspect the sheave grooves for wear, cracks, burrs or debris, and confirm that the sheaves are aligned and match the 40° angle of the belt.
- How do I request a quote for the C 91?
- Send the part number C 91, the quantity and your drive details by WhatsApp or email. If needed, include the old belt marking and a photo of the drive so the team can confirm the right belt or suggest an equivalent.