V-belt Mitsuboshi A 105
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and MITSUBOSHI: matching part numbers →GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI A 105 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 105 and any equivalents.
The Mitsuboshi A 105 is a classical V-belt in the A profile. Its dimensions are 13 mm top width, 8 mm height and a 40 degree angle, which is what you need to confirm against the pulley groove before you order.
The profile and the length are the two things to check first. An A profile belt sits in a groove sized for a 13 mm top width and an 8 mm height, so a worn or mismatched pulley will show up as poor grip and uneven wear rather than as a belt fault. The 40 degree angle is the standard included angle for this profile, and it should match the groove angle of the sheave it runs in.
If you are matching an existing belt, read the marking on the back of the old belt and send us that part number. The same size is also listed under Stark A 105 and Optibelt A 105, so if your line uses more than one brand you can quote the size consistently across the drive.
For a quote, send the part number, the quantity and the drive it goes on. If a drive runs more than one belt, order the full set together so the belts are matched in length and wear evenly. We carry Mitsuboshi belts and can help confirm the right belt or suggest an equivalent from the data you send.
Dimensions
- Section
- A
Frequently asked questions
- What does the A in A 105 tell me?
- It is the profile: a classical V-belt with a 13 mm top width, an 8 mm height and a 40 degree angle. Use those dimensions to match the pulley groove.
- How do I confirm this is the right belt?
- Read the marking on the back of the belt you are replacing and send it to us with the drive details. If the marking is gone, measure the top width and height and check the pulley groove.
- Is the same size offered under another brand?
- Yes. The same size is also listed under Stark A 105 and Optibelt A 105, so you can keep the size consistent across a drive regardless of the brand on the shelf.