V-belt Mitsuboshi A 108
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI A 108 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 108 and any equivalents.
The Mitsuboshi A 108 is a classical V-belt with an A profile. The 13 mm top width, 8 mm height, and 40° angle identify the cross-section, while the A 108 part number specifies the belt's length. Use these dimensions to confirm the belt matches your drive before you request a quote.
When you read the marking on an existing belt, the profile and the part number are the two details that matter most. The A profile sets the cross-section: 13 mm across the top, 8 mm high, with a 40° angle. The 108 in the part number identifies the length. If your drive uses an A-profile belt and the old belt is marked A 108, this Mitsuboshi belt is the one to quote.
For a correct quote, send the part number A 108 and, if you have it, the marking from the back of the belt. If the old belt is worn or the marking is unreadable, measure the top width and height and note the drive's sheave groove. Our team can confirm the A profile and the length from those details and help you match the belt to the drive.
Classical V-belts like the A 108 are used in industrial drives where a standard cross-section is required. Inspect sheaves for wear and alignment when you replace a belt, and replace belts in sets on multi-belt drives so the load is shared evenly. The A 108 is a single belt; order the quantity your drive needs.
Dimensions
- Section
- A
Frequently asked questions
- What do the profile and the part number tell me about the A 108?
- The A profile gives the cross-section: 13 mm top width, 8 mm height, and a 40° angle. The 108 in the part number identifies the belt length. Together they let you match the belt to a drive that uses an A-profile belt of that length.
- How do I confirm the A 108 is the right belt for my drive?
- Check the marking on the back of the old belt. If it reads A 108, this is the same size. If the marking is worn, measure the top width and height and note the drive's sheave groove, then send those details with your quote request.
- What should I send to request a quote for the A 108?
- Send the part number A 108 and the quantity you need. If you are unsure of the size, include the old belt's marking or the measured top width, height, and the drive details. Our team will confirm the belt and reply by WhatsApp or email.