V-belt Mitsuboshi A 103
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and MITSUBOSHI: matching part numbers →GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI A 103 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 103 and any equivalents.
The Mitsuboshi A 103 is a classical V-belt with an A profile. Its 13 mm top width, 8 mm height and 40° angle identify the cross-section, while the 103 code identifies the belt length. Use these values to match the belt you are replacing.
The A profile is a standard classical cross-section. The 13 mm top width and 8 mm height tell you the belt fits a sheave groove cut for an A-section belt. The 40° angle is the included angle of the belt's sides, which seats against the flanks of the pulley groove.
The 103 in the part number is the length designation. When you read the marking on the back of an old belt, compare both the profile letter and this length code. A belt with the same profile but a different length code will not sit correctly in the drive.
The same size is also listed under Gates A 103 and Optibelt A 103. If your drive uses more than one A-section belt, inspect all belts in the set and replace them together so the load stays evenly distributed. Send the part number and the quantity you need by WhatsApp or email to request a quote.
Dimensions
- Section
- A
Frequently asked questions
- What do the profile and length mean on the Mitsuboshi A 103?
- The A profile gives the cross-section: 13 mm top width, 8 mm height and a 40° angle. The 103 is the length designation for this belt.
- How do I confirm the A 103 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The profile letter and length code should match A 103. You can also measure the cross-section and compare it with the 13 mm top width and 8 mm height.
- What should I send to request a quote?
- Send the part number A 103 and the quantity you need by WhatsApp or email. If you are replacing a set, include the number of belts on the drive.