V-belt Optibelt A 103
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 103 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 103 and any equivalents.
The Optibelt A 103 is a classical V-belt in the VB / Red Power series. It has an A profile, a 2667 mm length, a 13 mm top width, an 8 mm height and a 40° angle. To match it to the belt being replaced, read the marking on the old belt and compare profile and length.
Start by locating the marking on the back of the belt you are replacing. If it shows an A profile and a 2667 mm length, this Optibelt A 103 is the correct size. If the old belt is worn or the marking is unreadable, measure the top width (13 mm) and the height (8 mm) to confirm the profile, then measure the length to confirm 2667 mm.
The same size is also listed under Mitsuboshi A 103 and Gates A 103. If you prefer one of those brands, you can request it by that part number. When you send your quote request, include the part number you need, the quantity, and the application so we can help confirm the right belt or suggest an equivalent.
For drives using multiple belts, replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven tension and premature wear. Inspect the pulleys for wear or debris and check alignment before installing the new belt.
Dimensions
- Section
- A
- Length
- 2667mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt. It should show an A profile and a 2667 mm length. If the marking is not clear, measure the top width and height to confirm the profile and measure the length to confirm 2667 mm.
- Can I use this belt with other brands in the same drive?
- No. For drives with multiple belts, replace all belts at the same time with belts of the same size and brand. Mixing brands or new and worn belts can cause uneven tension.
- What information should I send with my quote request?
- Send the part number, quantity, and the application or drive details. If you are not sure of the part number, send the marking from the old belt or the measurements you took.