V-belt Mitsuboshi 3V 560
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 3V 560 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 560 and any equivalents.
The Mitsuboshi 3V 560 is a narrow wedge V-belt with a 3V profile. When replacing a belt, start by reading the marking on the back of the old belt. That marking tells you the profile and the part number you need to match.
A 3V profile identifies this as a narrow wedge V-belt, often called a wedge belt. The 560 in the part number corresponds to the belt's length. If your old belt is marked 3V 560, this Mitsuboshi belt is a direct match for that size. The same size is also listed under Stark 3V 560, Optibelt 3V 560, and Dayco 3V 560.
Before ordering, confirm the marking on the old belt. Look for the profile and the length number, and check for any additional characters that may indicate a special construction. If the marking is worn or unreadable, measure the top width and the outside length to confirm the profile and length. Send the complete marking or your measurements when you request a quote.
Dimensions
- Section
- 3V
Frequently asked questions
- How do I read the marking on my old belt?
- Look on the back of the belt for a printed or molded code. You are looking for the profile, such as 3V, followed by a length number. For this belt, the marking would be 3V 560. If the marking is faded, note any remaining characters and measure the belt to confirm.
- What if my belt is marked with a different brand?
- The profile and length are what matter. If your old belt is marked 3V 560, this Mitsuboshi belt matches that size. The same size is also listed under Stark, Optibelt, and Dayco.
- What information should I send for a quote?
- Send the full marking from your old belt, including the profile and length. If you have the part number 3V 560, that is enough to start. If the marking is unreadable, send the top width and outside length instead.