V-belt Dayco 3V 560
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
- Series
- Wedge industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 3V 560 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 560 and any equivalents.
This page covers the Dayco 3V 560, a narrow wedge V-belt in the 3V profile with a length of 1422.4 mm. Use it to match the belt you are replacing before you send your quote request.
The most reliable way to match a replacement is to read the marking on the back of the belt you are removing. Confirm the profile reads 3V and the length reads 560, then compare it with the length of 1422.4 mm shown here. If the old belt is worn, frayed or cut, take the profile and length from the drive documentation or measure the belt while it is still intact.
The same size is also listed under Stark 3V 560, Mitsuboshi 3V 560 and Optibelt 3V 560. If your drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. After installation, check the drive for worn sheaves, correct alignment and proper tension.
For a quote, send the part number Dayco 3V 560, the quantity you need and a photo of the marking on your old belt. Our team replies by WhatsApp or email and can confirm the belt or suggest an equivalent.
Dimensions
- Section
- 3V
- Length
- 1422.4mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The profile should read 3V and the length should read 560, matching the 1422.4 mm length listed for this belt.
- What should I send to request a quote?
- Send the part number Dayco 3V 560, the quantity you need and a photo of the marking on your old belt. Our team replies by WhatsApp or email.
- Should I replace all the belts on the drive at once?
- If the drive uses more than one belt, replace the full set together so the belts share the load evenly. Check sheaves, alignment and tension as part of the same job.