V-belt Mitsuboshi 3V 530
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI 3V 530 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 530 and any equivalents.
This Mitsuboshi 3V 530 is a narrow wedge V-belt with a 3V profile and a length of 530 mm. It is used in compact industrial drives where a standard V-belt would be too wide or too heavy for the pulley grooves.
Narrow wedge belts like this 3V profile are common on pumps, fans, compressors and other equipment where space is limited and the drive runs at higher speeds. The 3V section fits pulleys cut for 3V belts, so check the groove width and the belt marking before ordering. The 530 mm length is the datum length for this belt.
To confirm fit, read the marking on the back of the old belt. Look for the 3V profile and the 530 length, and match them to this Mitsuboshi belt. If the old belt is worn or the marking is unreadable, measure the outside length and compare it with the 530 mm figure, or send us the drive details and a photo of the pulley arrangement.
The same size is also listed under Stark 3V 530, Optibelt 3V 530 and Dayco 3V 530. If you are replacing more than one belt on a multi-belt drive, order the full set so all belts have the same profile and length.
Dimensions
- Section
- 3V
Frequently asked questions
- What does the 3V profile mean for fit?
- The 3V profile is a narrow wedge section. It must match the pulley groove; a 3V belt will not seat correctly in a pulley cut for another profile. Check the old belt marking or the pulley groove before ordering.
- How do I confirm the length of this belt?
- The length is 530 mm. Compare it with the marking on the back of your old belt. If the marking is gone, measure the old belt and match it to 530 mm, or send us the drive details for help.
- Can I mix this belt with other brands on the same drive?
- For drives with multiple belts, we recommend replacing the full set with belts of the same profile and length. This Mitsuboshi 3V 530 can be used alongside the same size from Stark, Optibelt or Dayco, but all belts on the drive should be a matched set.