V-belt Gates SPZ 825 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 825 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 825 MN and any equivalents.
The Gates SPZ 825 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPZ profile, a length of 825 mm, a top width of 9.7 mm, a height of 8 mm and a 40-degree angle. This page covers how to read the marking on the back of the belt so you can match it correctly.
When you remove an old belt, look at the marking printed on its back. That marking carries the profile and the length, and it is the fastest way to identify what the drive needs. On this belt the marking shows SPZ and 825, which correspond to the SPZ profile and the 825 mm length. The same marking also identifies the series, here Super HC MN. Write down the full marking before you discard the belt.
If the marking is worn or unreadable, measure the top width and the height of the belt. This belt has a top width of 9.7 mm and a height of 8 mm, and its angle is 40 degrees. Those dimensions, together with the length, point to an SPZ profile. You can also compare the old belt to the replacement side by side before installation.
To request a quote, send us the full part number Gates SPZ 825 MN, or send the marking from the back of the old belt. Our team can confirm the belt and suggest an equivalent if needed. We carry Gates belts and serve maintenance, engineering and purchasing professionals across the United States, Canada, Mexico and South America.
Dimensions
- Section
- SPZ
- Length
- 825mm
Frequently asked questions
- How do I read the marking on a Gates SPZ 825 MN belt?
- The marking on the back of the belt shows the profile and the length. On this belt you will see SPZ and 825, which correspond to the SPZ profile and the 825 mm length. The series is also marked as Super HC MN.
- What should I send to request a quote for this belt?
- Send the full part number Gates SPZ 825 MN, or send a photo of the marking on the back of your old belt. If the marking is unreadable, include the top width, height and length. Our team will confirm the belt and suggest an equivalent if needed.
- Can you help if the marking on my old belt is worn off?
- Yes. If the marking is worn, measure the top width, height and length of the old belt. For this belt those are 9.7 mm top width, 8 mm height and 825 mm length, with a 40-degree angle. Send those dimensions and we can identify the correct replacement.