V-belt Gates SPZ 800 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 800 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 800 MN and any equivalents.
When you replace a narrow wedge V-belt, the most reliable starting point is the marking on the belt you are removing. This page covers the Gates SPZ 800 MN from the Super HC MN series, an SPZ profile belt with a length of 800 mm. Use the data below to confirm it matches your drive before you request a quote.
The SPZ 800 MN is a narrow wedge V-belt with an SPZ profile and a length of 800 mm. Its top width is 9.7 mm, its height is 8 mm, and its angle is 40 degrees. These figures identify the belt by profile and length, which are the two dimensions you need to match against the old belt.
To match it to the belt being replaced, read the marking on the back of the old belt. If it shows SPZ and 800, this belt is the same profile and length. Also check the belt's condition and the drive components while the belt is off, so a worn sheave or misalignment does not shorten the life of the replacement.
If the marking is worn away or unreadable, measure the top width and the outside length of the old belt and send those figures with your request. We carry the Gates SPZ 800 MN and can confirm it against your application.
Dimensions
- Section
- SPZ
- Length
- 800mm
Frequently asked questions
- How do I confirm the Gates SPZ 800 MN fits my drive?
- Check the marking on the back of the belt you are replacing. If it shows SPZ and 800, this belt has the same profile and length. If the marking is unreadable, measure the top width and outside length and send those figures with your quote request.
- What are the dimensions of this belt?
- The SPZ 800 MN has an SPZ profile, a length of 800 mm, a top width of 9.7 mm, a height of 8 mm, and a 40 degree angle.
- What should I send to request a quote?
- Send the part number SPZ 800 MN, the quantity you need, and the equipment or drive it is going on. If you are replacing an unmarked belt, include the top width and outside length you measured.