V-belt Gates SPZ 812 MN

GATES SPZ 812 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 812 MN and any equivalents.

The Gates SPZ 812 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPZ profile, a length of 812 mm, a top width of 9.7 mm, a height of 8 mm and a 40-degree angle. Before fitting this belt, inspect the drive and sheaves so the new belt runs correctly.

Check sheave grooves for wear, corrosion, burrs or embedded debris. Worn or damaged grooves can shorten belt life and cause slippage even when the belt itself is correct. Confirm the sheaves are aligned and the shafts turn freely. Verify that the replacement belt matches the old marking: SPZ profile, 812 mm length and 40-degree angle.

If the drive uses multiple belts, replace the full set at the same time. Mixing a new belt with used belts can cause uneven tension and poor load sharing. After installation, set tension according to the drive manufacturer's procedure and recheck it after the first hours of running. Keep the sheaves clean and dry.

To request a quote, send the part number SPZ 812 MN by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent. Include the quantity needed and any details from the old belt marking.