V-belt Gates SPZ 750 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 750 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 750 MN and any equivalents.
The Gates SPZ 750 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPZ profile, a 750 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle. When you are replacing a belt, the marking on the back is the fastest way to confirm you are matching the same profile and length.
Start by reading the old belt. Look for the profile and the length on the back, and compare them with SPZ and 750 mm. The top width, height and angle describe the belt's cross-section, so they should correspond to the dimensions of the belt you are removing. If the old belt is worn or the marking is gone, measure the top width and the outside length before you request a quote.
A belt that matches in profile and length but differs in construction may still fit the drive, so it is worth confirming the full marking with your quote request. Send the part number SPZ 750 MN, or a photo of the belt back, along with the drive details you have. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 750mm
Frequently asked questions
- How do I match the Gates SPZ 750 MN to the belt I am replacing?
- Check the marking on the back of the old belt for the profile and length. The SPZ profile and 750 mm length are the key figures to compare. If the marking is unreadable, measure the top width and the outside length and include those measurements with your request.
- What dimensions define this belt?
- It has an SPZ profile, a 750 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle.
- What should I send to request a quote?
- Send the part number SPZ 750 MN, or the marking from the back of the belt you are replacing. If you have the drive details, include them so the team can confirm the right belt or suggest an equivalent.