V-belt Gates SPZ 760 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 760 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 760 MN and any equivalents.
This Gates SPZ 760 MN belt is a narrow wedge V-belt from the Super HC MN series. It is identified by its SPZ profile and 760 mm length. Use these two dimensions to confirm it matches the belt you are replacing.
Narrow wedge V-belts like this one are common on industrial drives where a compact cross-section is needed. The SPZ profile has a 9.7 mm top width, an 8 mm height, and a 40 degree angle. Because the profile and length are both fixed, checking the old belt's marking is the most direct way to confirm fit.
To verify, read the marking on the back of the belt you are removing. It should show the same SPZ profile and a 760 mm length. If the marking is worn or missing, measure the belt's top width and height, and confirm the length against the drive's setup. Send the part number, SPZ 760 MN, along with any photos or measurements to our team for a quote.
For drives using multiple belts, replace the full set at the same time so the load stays evenly distributed. Inspect the sheaves for wear, alignment, and debris before installing new belts. If you need help confirming this belt or finding a match, contact MR Industrial Accessories with the part number and drive details.
Dimensions
- Section
- SPZ
- Length
- 760mm
Frequently asked questions
- How do I confirm this SPZ 760 MN belt fits my drive?
- Check the marking on the back of the belt you are replacing. It should read SPZ 760 MN or show the same SPZ profile and 760 mm length. If the marking is unreadable, measure the top width (9.7 mm) and height (8 mm) and confirm the length.
- What does the SPZ profile mean for my application?
- SPZ is a narrow wedge profile with a 9.7 mm top width, 8 mm height, and 40 degree angle. It is used on drives that require a compact belt cross-section. The profile and the 760 mm length together determine fit.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven loading. Inspect the sheaves for wear and alignment before installing the new set.