V-belt Gates SPZ 1487 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1487 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1487 MN and any equivalents.
This Gates SPZ 1487 MN belt is a narrow wedge V-belt from the Super HC MN series. It is built for industrial drives that need a compact, high-capacity belt. Confirm fit by checking the SPZ profile and the 1487 mm length against your drive.
Narrow wedge V-belts like this one are common on pumps, fans, compressors and other driven equipment where space is tight and loads are steady. The SPZ profile is a metric narrow section, and the 1487 mm length is the datum length you will find marked on the belt. The 40-degree angle and 9.7 mm top width by 8 mm height are fixed dimensions of the profile, so they should match the pulley groove.
To confirm the belt is right for your drive, read the marking on the back of the old belt. Look for the SPZ profile and the 1487 length, along with the Gates name and Super HC MN series. If the old belt is worn or the marking is gone, measure the outside circumference and compare it to the length, or check the drive documentation for the specified belt. When in doubt, send a photo of the belt and the pulley groove.
If you are replacing more than one belt on a multi-belt drive, order the same part number for all positions so the set matches. A mixed set can cause uneven tension and premature wear. For a quote, send the part number SPZ 1487 MN, the quantity, and any details about the drive. We carry Gates belts and can help confirm the correct replacement.
Dimensions
- Section
- SPZ
- Length
- 1487mm
Frequently asked questions
- How do I confirm this SPZ 1487 MN belt fits my drive?
- Check the old belt for the SPZ profile and 1487 length marking. Also verify the pulley groove matches the 9.7 mm top width and 40-degree angle. If the marking is unreadable, measure the outside circumference and compare it to the 1487 mm length.
- What does the SPZ profile mean for my application?
- SPZ is a metric narrow wedge profile. It is used on industrial drives where a compact cross-section is needed. The 9.7 mm top width and 8 mm height are the profile dimensions, and the 40-degree angle fits the matching pulley groove.
- Can I use this belt with other belts on the same drive?
- Yes, but all belts on a multi-belt drive should be the same part number and from the same production run if possible. That keeps tension even across the set. Order the quantity you need by part number SPZ 1487 MN.